Heated Grips for Motorcycle and Electric Bike

12V input voltage and 22MM inner diameter of the grips,suitable for most motorcycles
The switch can adjust the temperature high and low at will（Adjustable from 50℃-70℃）
Double throttle buckle with wider installation ranges
Open design,do not affect installation of handle stuck,handle lamp and other decorative accessories,much more beautiful and convenient

Net weight: 221g
Gross weight: 247g
Product color: Black
Length of grip: Left: 122mm; Right: 136mm
Diameter of handle: 22mm
Input voltage: 12V
Power: Adjustable from 12W-24W
Temperature: Adjustable from 50℃-70℃
Grip type: Open-end heated grip
Switch type: adjustable switch
Application: 12V, 22mm handle motorcycle and electric bike

Note:
1. Don't twist the grip too much when installing the left one, or the heating wires will be shifted.
2. With the balanced iron model,please adjust its installation position.Don't squeeze the grip when tighten the screws, and the balance iron is slightly separated from it.If the balance iron installation position could not be adjusted,please add a pad between balance iron and grip to separate them, if squeeze the grip excessively,it may cause difficulties to use the temperature adjustment switch,heating wire extrusion and other non-normal damages.

Installation instructions:
1. Remove the original grips from motorcycle
2. Wet the inner hole with soapy water with the left hand, and do not twist too much during installation
3. When installing the balance iron with the left hand,adjust the position of the balance iron to be slightly separated from the handle.Do not squeeze the handle when tightening screws
4. If the left hand grip slides on handlebar,remove the balance iron and fix it with a few drops of 502 glue from the end of the handle
5. Red wire is connected to the positive pole,and black wire is connected to the negative pole.Temperature cannot be adjusted if reverse connection.
6. It should leave enough power wires for rotation when installing the left hand grip.